Chapter 5 Web GUI Setup and Monitoring
6 Choose Transport Stream > Digital Program Mapping for ASI Output or
MPEG over IP Output. The ASI or MPEGoIP Digital Program Mapping page is
displayed.
7 In the DPM Program Entry Setup table, click Resynchronize All and click the
Resynchronize Program, PMT PID, ES List & ES PIDs radio button and click
OK. This copies the input services PIDs to the remapped output service PIDs.
8 In the DPM Program Entry Setup table, choose the PE containing the channel
you want to configure and click Edit. The DPM PE PID MAP window is
displayed.
9 Click Add Row.
10 From the Action drop-down list, choose Pass, Drop, or Map.
11 Choose the input to output channel mapping from the Category drop-down list.
Video and PCR can be output on the same PID or different PIDs. If output on the
same PID, they will appear identical to the input.
12 Click Save.
13 Click OK.
14 In the DPM General Setting area, choose the following parameters:
15 Click Table Options. The DPM Table Options window is displayed.
16 Set the following parameters:
To Next Page
Loading...
Need help?
General
