Cisco D9824 User Manual

Configuring System Settings
269
3 In the Settings Filename field, enter the file name of the backup/restore file. You
can enter up to 119 characters.
4 In the FTP Server IP Address field, enter the IP address of the FTP server used to
restore the backup/restore file.
5 In the FTP User Name and FTP Password fields, enter the user name and
password to access the FTP server.
Note: The FTP Password is not retained in the receiver. You must re-enter the
password before initiating the backup or restore operation.
6 In the FTP Port Number field, enter the port number of the FTP server used to
store the backup/restore file. You can enter a port number in the range from 1 to
65535.
7 Click the Export Device Settings & Transport Network Information radio
button to save user settings and tuning information to the backup file. Click the
Export User Device Settings Only radio button to save user settings to the
backup file.
8 Click Export to save the settings to a backup file. Click Import to retrieve the last
backed up file.
For information on the Settings File Back/Restore/Operation History areas, see
Viewing the Backup/Restore Status (on page 267).

Cisco D9824 Specifications

General

Brand	Cisco
Model	D9824
Category	Receiver
Language	English