Cisco D9858 User Manual

Chapter 4 Front Panel Operation
128
Menu Item
Description
Ver
Indicates the version number of the ISE.
Serial Number
Indicates the unique device serial number.
Customer Code
Indicates the unique Customer Code assigned to an organization by Cisco.
Board ID
Indicates the hardware board design identification.
Revision
Indicates the revision number of the board design.
MAC Address
Indicates the MAC address of the Control Port Ethernet interface.
FPGA Type
Indicates the FPGA type and number information.
Transcoder S/N
Indicates the serial number of the transcoder.
Revision
Indicates the revision version of the transcoder.
Number of
Transcoder Paths
Indicates the number of transcoding paths (1 or 2).
Licenses
Menu Item
Description
Parameters
Feature
Displays a list of software licenses for
the D9858 Advanced Receiver
Transcoder. Press up and down to scroll
through the list of features.
Digital Fingerprint Trigger,
Statmux, 2nd Transcoder
Channel, HD Transcode
Enb
Indicates whether the selected software
feature is licensed and enabled.
Note: All software licenses are enabled
for this release (temporarily). Any of
these required licenses will need to be
purchased from Cisco in subsequent
software releases.
Yes or No
Features
Menu Item
Description
Parameters
Feature
Displays a list of hardware options for
the D9858 Advanced Receiver
Transcoder. Press up and down to scroll
through the list of options.
MPOIP Out, Physical
Transcoders, or Firewall Ver
Installed
Indicates whether the selected
hardware option is installed.
Yes or No

Cisco D9858 Specifications

General

Brand	Cisco
Model	D9858
Category	Receiver
Language	English