Cisco D9858 User Manual

Setup Menu
69
Status
Menu Item
Description
Parameters
Service List Mode
Indicates if all the expected
service list tables are present
(Rigorous) or only some of the
service list tables are present
(Degraded)
Degraded or Rigorous
BAT
This is not supported in the
current release.
No
NIT
Indicates whether the Network
Information Table (NIT) is being
used to create the service list.
Yes or No
SDT
Indicates whether the Service
Description Table (SDT) is being
used to create the service list.
Yes or No
PAT
Indicates whether the Program
Association Table (PAT) is being
used to create the service list.
Yes or No
Frequency Tuning
Indicates whether tuning is
using the NIT to tune to other
transports, or whether tuning is
forced to use the user selected
parameters.
NIT or User Cfg
Re-Acquire
Menu Item
Description
Parameters
Re-Acquire
Re-acquires the signal using the
tuning parameters from user
settings.
Abort or Continue. Select Abort to
cancel the operation or choose Continue
to complete the operation.
Setup Menu: IP
To view the IP menu from the Main menu, press the RIGHT arrow key once and
then the SELECT key to reach the Setup menu. Then, press the RIGHT arrow key
twice and the SELECT key to view the IP menu.
The IP menu allows you to set the parameters for communicating with other
equipment via the Ethernet Data and Management ports for MPEGoIP and MPE
applications and upgrading application software.

Cisco D9858 Specifications

General

Brand	Cisco
Model	D9858
Category	Receiver
Language	English