Chapter 5 Web GUI Setup and Monitoring
Logging On to the Web GUI
1 Open a web browser.
2 Type the IP address of the D9858 Advanced Receiver Transcoder in the Address
bar and press Enter.
3 In the Username and Password fields, enter the username and password.
Note: The username and password are case-sensitive. The default username is
admin and the default password is localadmin. If you have forgotten your
username and password, you can reset them from the front panel menu of the
D9858 Advanced Receiver Transcoder. For more information, see Resetting the
Login Credentials (on page 32).
Important: The password and user name will be remembered for the whole of
the web session. Close the web browser if you want to prevent others from
accessing the settings of the D9858 Advanced Receiver Transcoder.
If your session expires, you must refresh the browser and log back in.
4 Click Log In.
Note: If you check the Remember username check box, the user name will be
remembered the next time you log into the web GUI.
To Next Page
Loading...
