Cisco D9858 User Manual

Chapter 5 Web GUI Setup and Monitorin g
174
Viewing the PID Input Status
From the user interface of the D9858, choose Input > PID Input Status. The PID
Input Status page is displayed.
You cannot make any changes in the PID Input Status table and can only view the
available channels and their settings. The following is a list of the various columns:
Abbreviation
Description
PE Index
Indicates the Program Entry number (PE1 or PE2).
Note: The single channel transcoder (D9858-1) supports one Program
Entry (PE1) only.
Type
Name assigned to the Program Entry, up to 4 alphanumeric characters.
Detail
Displays any detail associated with the program PID (for example, MPG2
PID). The parameters are: MPG1 VID, MPG2 VID, 422 VID, H264 VID, HD
VID, MPG4 VID, MPG AUD, MPG2 AUD, DVB AC3, DVB DDP, AAC
AUD, HEAAC, AUD, MPG4 AUD, DBE AUD, DTS AUD, DVB TXT, DVB
VBI, DVB SUBT, DVB ASYN, DVB SYNS, DVB SYND, DVB MPE, DVB
DCAR, DVB OCAR, SA VBI, ATSC AC3, ATSC DDP, SA UTLD, SCTE
DPI, SA HSD, SA CDDL, SA WBD, SA SUBT, ECM, EMM, PCR, or
UNKNOWN.
Language
Displays the language code carried in the PMT for the current PID, if
applicable.
PID
The program PID number, in the range from 1 to 8192.
Present
Indicates whether the PID is present in the incoming stream (Yes or No).

Cisco D9858 Specifications

General

Brand	Cisco
Model	D9858
Category	Receiver
Language	English