EasyManua.ls Logo

Cisco D9858 - Deleting a Program from the Program Entry

Cisco D9858
396 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 Front Panel Operation
42
The PE (Program Entry) channel is initially displayed.
Note: PE1 is the default.
2 Press the ADV key to select PE1.
s
PE1 1 Channel Name
RF1 Freq:12.658 Lvl:-50 Marg:11.6
PE
3 Press to scroll through the available program entries.
Note: The D9858 is available in a single channel (D9858-1) or a dual channel
configuration. The single channel transcoder (D9858-1) supports one Program
Entry (PE1) only.
4 Press ADV again to select the channel number.
s
PE1 1 Channel Name
RF1 Freq:12.658 Lvl:-50 Marg:11.6
Ch #
5 Directly enter the channel number using the 0 to 9 keys and press SELECT to
apply the channel number, or press to scroll through the available channels.
Deleting a Program from the Program Entry
To delete a program from the PE:
1 Press MENU until the startup screen appears.
s
PE1 706 Channel Name
RF1 Freq:12.658 Lvl:-50 Marg:11.6
Ch #PE #
The PE channel is displayed.
Note: PE1 is the default.
2 Press the ADV key to select PE1.
s
PE1 1 Channel Name
RF1 Freq:12.658 Lvl:-50 Marg:11.6
PE
3 Press the to scroll through the available program entries.
4 Press ADV again to select the channel number.
5 Enter the channel number 0 with the numeric keys and press SELECT to apply
and delete the program.

Table of Contents

Related product manuals