Applicable Standards and Notices
Safety
The D9858 Advanced Receiver Transcoder has been approved for safety by the
Standards Council of Canada and the OHSA (NRTL) Accredited Testing Laboratory
to the following standards:
CAN/CSA 60065-03 + Am1 +Am2 - Audio, Video and Similar Electronic Apparatus
- Safety Requirements.
UL Std No. 60065-03 (2012) - Audio, Video and Similar Electronic Apparatus - Safety
Requirements.
Also, this product is being evaluated under the IECEE CB scheme to the following
international standard:
IEC 60065:2001 (Seventh Edition) + A1:2005 + A2:2010 including the National
requirements of AR, AT, AU, BE, CA, CH, CN, CZ, ES, DE, DK, FI, FR, GB, HU, IE,
SI, IT, JP, KR, MY, NL, NO, PL, SE, SG, SI, SK, SV, US, UA and Group Differences as
posted at the following IECEE CB Website:
http://members.iecee.org/iecee/ieceemembers.nsf.
ESD
Electrostatic Discharge (ESD) results from the static electricity buildup on the human
body and other objects. This static discharge can degrade components and cause
failures.
Take the following precautions against electrostatic discharge.
Use an anti-static bench mat and a wrist strap or ankle strap designed to safely
ground ESD potentials through a resistive element.
Keep components in their anti-static packaging until installed.
Avoid touching electronic components when installing a module.
Electromagnetic Compatibility Regulatory Requirements
Ethernet cables should be of single-shielded or double-shielded type. Coaxial cables
should be of the double-braided shielded type. Where this equipment is subject to
USA FCC and/or Industry Canada rules, the following statements apply:
To Next Page
Loading...
Need help?
General
