Cisco D9858 User Manual

Chapter 5 Web GUI Setup and Monitorin g
220
5 Click Apply.
6 Choose Transport Stream > Digital Program Mapping for ASI Output or
MPEG over IP Output. The ASI or MPEGoIP Digital Program Mapping page is
displayed.
7 In the DPM Program Entry Setup, click Resynchronize All. This copies the input
services PIDs to the remapped output service PIDs.
8 Select the PE containing the channel you want to configure and click Edit. The
DPM PE PID MAP window is displayed.
9 Click Add Row.
10 From the Action drop-down list, choose Drop or Map.
11 Choose the input to output channel mapping from the Category drop-down list.
Video and PCR can be output on the same PID or different PIDs. If output on the
same PID, they will appear identical to the input.
12 Click Save.
13 Click OK.
14 In the DPM General Setting area, set the following parameters:
Parameter
Description
Remapping Mode
Svc ID & PID
Duplication Method
Pkt Copy
Unreferenced Content
Drop
Service ID Output
Valid Ch/All Ch
PSI Table Output Option
Ctl By Table
PSI Regeneration Option
Always/As Needed
15 Click Table Options. The DPM Table Options window is displayed.
16 Set the following parameters:
Parameter
Description
PAT
Regen
CAT
Regen
PMT
Regen
TSDT
Drop
NIT
Regen or Drop
NITO
Drop
SDT
Regen
SDTO
Drop
BAT
Drop

Cisco D9858 Specifications

General

Brand	Cisco
Model	D9858
Category	Receiver
Language	English