D9858 Advanced Receiver Transcoder
 PSI/SI regeneration for both programs
 4:2:0 HD 1080i and 720p video decoding
 Active Formal Descriptor (AFD) support for down-conversion of a decoded HD
program with aspect ratio conversion
 Dolby Digital (AC-3) audio decoding
 Closed captioning pass-through of EIA-608 and EIA-708 for transcoded
programs
 Audio pass-through synchronization for transcoded programs
 Additional ASI outputs for redundancy
 MPEGoIP output for network connectivity
 DVB subtitle pass-through with transcode programs
 DVB subtitle burn-in support
 Contact closure terminals for simple alarm monitoring
 Simple Network Management Protocol (SNMP) for setup, control and
monitoring
 Field upgradeable software
 Front panel liquid crystal display (LCD) for control and monitoring
 Web browser interface for easy setup, control, and monitoring
 Uplink addressable decoder output control, including vertical blanking interval
(VBI) data, audio routing, DPI, and ASI output)
 Dual-tone multifrequency (DTMF) cue tone and cue trigger outputs for
advertisement insertion
 Digital program mapping providing uplink control for service replacements in
blackout areas
 Cisco Live Event Controller support
 Fingerprint support in transcoded output
 On screen display support in transcoded output
 Satellite Disaster Recovery support with Cisco PowerVu Network Center uplink
control (Release 12.5 or higher)
 NIT Retune Recovery
To Next Page
Loading...
Need help?
General
