Viewing Support Information
Downloading the Software Application
In the Download APP area, click Choose File to select the new version of FPGA or
the D9858 Advanced Receiver Transcoder’s software application. The Open dialog
opens. Select the upgrade file and click Open. Click Download to download the
selected upgrade file. File formats that can be downloaded include Application
CDTs and FPGA CDTs.
During the upgrade, click Return to Browser (not recommended) to return to the
web browser. The application download continues. We do not recommend that you
interrupt the upgrade during the application download. Click Download Status
Toggle to move between updating the Download Status data on the Versions page
and updating the download status on an external device.
Note: For application downloads, once the download is complete, the D9858
transcoder will reboot automatically. For FPGA downloads, you must click Reboot
Receiver to manually reboot the D9858 transcoder and complete the download. This
is to facilitate the typical case in which the user intends to flash the FPGA file (no
auto reboot) followed by an APP download (auto reboot).
Note: If you are downloading an older version of the software application, we
recommend that you clear the browser cache prior to logging back in to the D9858
web GUI.
To Next Page
Loading...
Need help?
General
