Cisco D9858 - Page 296

Chapter 6 Service and Maintenance
274
Alarm
Message
Type
Message
Cause/Remedy
Description
Severity
ID
Trans 2 Flash
Fail
Set
Contact Customer
Service (%s fail at
%d)
Cause: FLASH
driver operation %s
(one of ERASE,
WRITE,
BLANK_CHECK
or READ_WRITE)
failed on the
Transcoder 2 (Sat2)
FLASH offset %d.
Remedy: Contact
Cisco Services.
The FLASH
device
hardware
failed.
Major
940
Settings Lost
Set
Stored
configuration
incomplete.
Contact Customer
Service.
Cause: Corrupted
database record
was found while
populating the
DBR partition.
Remedy: Contact
Cisco Services.
The settings
database
detects
corruption.
Major
950
Signal Status
Set
ASI Signal - No
Content
Cause: Loss of
ASI/RF lock. Loss
of Transport data.
Invalid frequency
parameters.
External to IRD.
Remedy: Check
tuning parameters
and ASI/RF cables.
ASI Link
Locked, but
no TS content.
Minor
1000
Signal Status
Set
RF Signal - No
Content
Cause: Loss of
ASI/RF lock. Loss
of Transport data.
Invalid frequency
parameters.
External to IRD.
Remedy: Check
tuning parameters
and ASI/RF cables.
RF Tuner
locked, but no
TS content.
Minor
1000