Cisco D9858 - Appendix A Technical Specifications

309
Warning
Message
Type
Message
Cause/Remedy
Description
ID
Transcoding
Condition
Clear
Transcoding cmd
msg operational
–
–
39500
Transcoding
Condition
Clear
Transcoding
retrieve
operational
–
–
39500
Transcoding
Condition
Clear
Transcoding
config
operational
–
–
39500
Transcoding
Condition
Clear
Transcoding
operational
–
–
39500
ASI TS
Overflow
Set
ASI Output
Overflow
Cause: Uplink settings
may have changed since
setting up the unit.
Variable bit rate or
statmuxed streams may
be in use.
Remedy: Increase the
output rate, drop
unreferenced content in
DPM Options, and drop
the programs that are
not needed for
downstream devices.
Contact your (uplink)
service provider to
verify the expected bit
rate settings.
The output rate is
higher than level set
by the user.
40000
ASI TS
Overflow
Clear
ASI Output
Overflow
Cleared
–
–
40000
Transport Error
Set
Continuity Count
Error
Cause: Possible uplink
or signal issue.
Remedy: Clear
warnings, reset the unit,
and notify Cisco
Services if the problem
persists.
Transport packet
continuity count
jumped. Possible
packet loss.
42000