Cisco D9858 - Page 334

Chapter 6 Service and Maintenance
312
Warning
Message
Type
Message
Cause/Remedy
Description
ID
TEB ENC1
Temper.
Warning
Set
Temperature
over Warning
threshold
Cause: Room
temperature is too high,
or air flow is blocked.
Remedy: Check the
openings on the front
and rear panels for
blockage, assess the
room temperature.
Lower the room
temperature or improve
air flow to the device.
TEB encoder 1
temperature is above
the safe operating
range.
47000
TEB ENC1
Temper.
Warning
Clear
Temperature
normal
–
TEB encoder 1
temperature is within
the normal operating
range.
47000
TEB ENC2
Temper.
Warning
Set
Temperature
over Warning
threshold
Cause: Room
temperature is too high,
or air flow is blocked.
Remedy: Check the
openings on the front
and rear panels for
blockage, assess the
room temperature.
Lower the room
temperature or improve
air flow to the device.
TEB encoder 2
temperature is above
the safe operating
range.
48000
TEB ENC2
Temper.
Warning
Clear
Temperature
normal
–
TEB encoder 2
temperature is within
the normal operating
range.
48000
VBI Data
Set
2nd VBI PID
attempt to write
same line
Cause: Uplink
configuration issue.
Remedy: Contact uplink
to verify expected VBI
settings.
Conflicting VBI data
on second VBI PID.
49000
VBI Data
Clear
Line Collision
Cleared
–
–
49000