Cisco D9858 - Appendix B Default Settings and Lock Levels

325
Warning
Message
Type
Message
Cause/Remedy
Description
ID
D/R Value Out
of Range
Set
Tuning
parameter out of
range for Backup
(list of affected
DR Backup
Transports)
Cause: One or more
tuning parameter values
in one or more of the
Backup Transport is
outside of the expected
range.
Remedy: Contact your
PNC uplink
administrator to check
the tuning parameters
and RF Input settings for
identified disaster
recovery backup
transports.
The Disaster Recovery
Table received from
the uplink is invalid.
99360
D/R Value Out
of Range
Clear
cleared
–
The error is cleared
before re-validating
tuning.
99360
D/R Rolloff
Invalid
Set
Rolloff factor
invalid for DVB
for Backup (list
of affected DR
Backup
Transports)
Cause: The selected
Rolloff factor value for
the identified Backup
Transport is not valid
for the selected DVB
system.
Remedy: Contact your
PNC uplink
administrator to check
the tuning parameters
and RF Input settings for
the identified disaster
recovery backup
transports.
The Disaster Recovery
Table received from
the uplink is invalid.
99370
D/R Rolloff
Invalid
Clear
cleared
–
The error is cleared
before re-validating
tuning.
99370