Indicates the program PID number.
Indicates whether the PID is present
in the incoming stream.
Program Status
Indicates the Program Entry
number.
PE1 to PE2
Note: The single channel transcoder
(D9858-1) supports one Program Entry
(PE1) only.
This displays the status of an
alternate authorized
program/service from the same
transport stream when the receiver
is not authorized to view the
primary program. This is an uplink
initiated function that maps the
alternate service to the original
(primary) service PIDs, replacing
the original service with the
alternate service at the digital
transport output. No local
intervention is required by the
receiver operator for provision of
this service replacement feature.
Not Started - Indicates that an event has
not started.
Primary - Indicates that a service
replacement event is active, but the
primary program is being displayed.
Alternate - Indicates that a service
replacement event is active, and that the
receiver has tuned to and is displaying
the alternate program/event as it is not
authorized to view the scheduled event.
To Next Page
Loading...
Need help?
General
