Cisco Firepower 4100

DescriptionField
Port channel protocol:
none – Link Aggregation Control Protocol (LCAP) is not enabled
lcap – LCAP is enabled
Protocol
Name of virtual routing and forwarding (VRF) instance to which port is assigned, if
any.
VRF
Port IP addressIP Address
Port MTU (maximum transmission unit) sizeMTU
Related Commands
DescriptionCommand
In connect fxos mode, shows port information.show port
In connect fxos mode, shows VLAN information.show vlan
Cisco Firepower 4100/9300 FXOS Command Reference
291
S Commands
show interface brief (connect fxos)