Cisco IE 4000 Software Configuration Guide

102
Configuring Switch Clusters
Additional References
If a cluster member switch has its own IP address and community strings, they can be used in addition to the access
provided by the cluster command switch.
Figure 13 SNMP Management for a Cluster
Additional References
The following sections provide references related to switch administration:
Tra p
Tra p
Tra p
Command switch
Trap 1, Trap 2, Trap 3
Member 1 Member 2 Member 3
33020
SNMP Manager

Cisco IE 4000 Specifications

General

Product Type	Switch
Form Factor	DIN Rail Mountable
MAC Address Table Size	8000
Jumbo Frame Support	9216 bytes
Operating Temperature	-40°C to 70°C
Mean Time Between Failures (MTBF)	Over 500, 000 hours
Memory	256 MB DRAM
Mounting	DIN Rail, Wall
Certifications	EN 50121-4
Ports	8 x 10/100Base-TX Ethernet Ports