2
Configuration Overview
Feature Software Licensing
Policy-based routing
IPV6
Defaults
The default license is a lanbase RTU permanent license.
Configuring RTU Licenses
To configure RTU Licenses, follow these guidelines.
Displaying License Information
To determine which license is running on your device, do the following:
Enter the show version privileged EXEC command. The first line of output indicates the image, such as LANBASE.
Enter the show license privileged EXEC command, to see which is the active image:
Switch# show license
Index 1 Feature: ipservices
Period left: 8 weeks 4 days
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Priority: None
License Count: Non-Counted
Index 2 Feature: lanbase
Period left: Life time
License Type: PermanentRightToUse
License State: Active, In Use
License Priority: High
License Count: Non-Counted
Index 3 Feature: mrp-manager
Period left: 8 weeks 4 days
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Priority: None
License Count: 1/0/0 (Active/In-use/Violation)
Index 4 Feature: mrp-client
Period left: 8 weeks 4 days
License Type: Evaluation
License State: Active, Not in Use, EULA not accepted
License Priority: None
License Count: 1/0/0 (Active/In-use/Violation)
License Count: Non-Counted
ipservices license
To activate a Permanent Right-To-Use ipservices license, use the following command:
IE5000#license right-to-use activate ipservices
PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR
LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH
PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING
TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND
BY ALL THE TERMS SET FORTH HEREIN.
Use of this product feature requires an additional license from Cisco, together
To Next Page
Loading...
Need help?
General
