Cisco IE 4000 Software Configuration Guide

134
Configuring CIP
Monitoring CIP
Monitoring CIP
Troubleshooting CIP
Additional References
The following sections provide references related to switch administration:
Table 21 Commands for Displaying the CIP Configuration
Command Purpose
show cip {connection | faults | file |
miscellaneous | object | security| session
| status}
Displays information about the CIP subsystem.
Table 22 Commands for Troubleshooting the CIP Configuration
Command Purpose
debug cip {assembly | connection
manager | errors | event | file | io | packet
| request response | security | session |
socket}
Enables debugging of the CIP subsystem.

Cisco IE 4000 Specifications

General

Product Type	Switch
Form Factor	DIN Rail Mountable
MAC Address Table Size	8000
Jumbo Frame Support	9216 bytes
Operating Temperature	-40°C to 70°C
Mean Time Between Failures (MTBF)	Over 500, 000 hours
Memory	256 MB DRAM
Mounting	DIN Rail, Wall
Certifications	EN 50121-4
Ports	8 x 10/100Base-TX Ethernet Ports