Cisco IE 4000 Software Configuration Guide

351
Configuring MSTP
Configuration Examples for Configuring MSTP
Configuration Examples for Configuring MSTP
Configuring the MST Region: Example
This example shows how to enter MST configuration mode, map VLANs 10 to 20 to MST instance 1, name the region
region1, set the configuration revision to 1, display the pending configuration, apply the changes, and return to global
configuration mode:
Switch(config)# spanning-tree mst configuration
Switch(config-mst)# instance 1 vlan 10-20
Switch(config-mst)# name region1
Switch(config-mst)# revision 1
Switch(config-mst)# show pending
Pending MST configuration
Name [region1]
Revision 1
Instance Vlans Mapped
-------- ---------------------
0 1-9,21-4096
1 10-20
-------------------------------
Switch(config-mst)# exit
Switch(config)#
Additional References
The following sections provide references related to switch administration:

Cisco IE 4000 Specifications

General

Product Type	Switch
Form Factor	DIN Rail Mountable
MAC Address Table Size	8000
Jumbo Frame Support	9216 bytes
Operating Temperature	-40°C to 70°C
Mean Time Between Failures (MTBF)	Over 500, 000 hours
Memory	256 MB DRAM
Mounting	DIN Rail, Wall
Certifications	EN 50121-4
Ports	8 x 10/100Base-TX Ethernet Ports