Cisco IE 4000 Software Configuration Guide

849
Configuring IP Unicast Routing
Configuring BGP
Multi exit discriminator (MED)  Always compare: Disabled. Does not compare MEDs for paths from neighbors
in different autonomous systems.
 Best path compare: Disabled.
 MED missing as worst path: Disabled.
 Deterministic MED comparison is disabled.
Neighbor  Advertisement interval: 30 seconds for external peers; 5 seconds for internal
peers.
 Change logging: Enabled.
 Conditional advertisement: Disabled.
 Default originate: No default route is sent to the neighbor.
 Description: None.
 Distribute list: None defined.
 External BGP multihop: Only directly connected neighbors are allowed.
 Filter list: None used.
 Maximum number of prefixes received: No limit.
Neighbor  Next hop (router as next hop for BGP neighbor): Disabled.
 Password: Disabled.
 Peer group: None defined; no members assigned.
 Prefix list: None specified.
 Remote AS (add entry to neighbor BGP table): No peers defined.
 Private AS number removal: Disabled.
 Route maps: None applied to a peer.
 Send community attributes: None sent to neighbors.
 Shutdown or soft reconfiguration: Not enabled.
 Timers: keepalive: 60 seconds; holdtime: 180 seconds.
 Update source: Best local address.
 Version: BGP Version 4.
 Weight: Routes learned through BGP peer: 0; routes sourced by the local
router: 32768.
NSF
1
Awareness Disabled
2
. Allows Layer 3 switches to continue forwarding packets from a
neighboring NSF-capable router during hardware or software changes.
Route reflector None configured.
Feature Default Setting

Cisco IE 4000 Specifications

General

Product Type	Switch
Form Factor	DIN Rail Mountable
MAC Address Table Size	8000
Jumbo Frame Support	9216 bytes
Operating Temperature	-40°C to 70°C
Mean Time Between Failures (MTBF)	Over 500, 000 hours
Memory	256 MB DRAM
Mounting	DIN Rail, Wall
Certifications	EN 50121-4
Ports	8 x 10/100Base-TX Ethernet Ports