ATA Voice Field Reference
Regional page
Cisco Small Business ATA Administration Guide 145
B
CW Per Call Act
Code
Enables call waiting for the next call.
The default is *71.
CW Per Call Deact
Code
Disables call waiting for the next call.
The default is *70.
Block CID Act Code Blocks caller ID on all outbound calls.
The default is *67.
Block CID Deact
Code
Removes caller ID blocking on all outbound calls.
The default is *68.
Block CID Per Call
Act Code
Blocks caller ID on the next outbound call.
The default is *81.
Block CID Per Call
Deact Code
Removes caller ID blocking on the next inbound call.
The default is *82.
Block ANC Act
Code
Blocks all anonymous calls.
The default is *77.
Block ANC Deact
Code
Removes blocking of all anonymous calls.
The default is *87.
DND Act Code Enables the do not disturb feature.
The default is *78.
DND Deact Code Disables the do not disturb feature.
The default is *79.
CID Act Code Enables caller ID generation.
The default is *65.
CID Deact Code Disables caller ID generation.
The default is *85.
CWCID Act Code Enables call waiting, caller ID generation.
The default is *25.
CWCID Deact
Code
Disables call waiting, caller ID generation.
The default is *45.