ATA Voice Field Reference
Regional page
Cisco Small Business ATA Administration Guide 146
B
Dist Ring Act Code Enables the distinctive ringing feature.
The default is *26
Dist Ring Deact
Code
Disables the distinctive ringing feature.
The default is *46.
Speed Dial Act
Code
Assigns a speed dial number.
The default is *74.
Secure All Call Act
Code
Makes all outbound calls secure.
The default is *16.
Secure No Call Act
Code
Makes all outbound calls not secure.
The default is *17.
Secure One Call
Act Code
Makes the next outbound call secure. (It is redundant if all
outbound calls are secure by default.)
The default is *18.
Secure One Call
Deact Code
Makes the next outbound call not secure. (It is redundant if
all outbound calls are not secure by default.)
The default is *19.
Conference Act
Code
If this code is specified, the user must enter it before dialing
the third party for a conference call. Enter the code for a
conference call.
Attn-Xfer Act Code If the code is specified, the user must enter it before dialing
the third party for a call transfer. Enter the code for a call
transfer.
Modem Line Toggle
Code
Toggles the line to a modem.
The default is *99. Modem pass-through mode can be
triggered only by pre-dialing this code.
FAX Line Toggle
Code
Toggles the line to a fax machine. This field is not found in
the PAP2T.
The default is #99.
To Next Page
Loading...
