Cisco TelePresence MX200 G2 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 101
Cisco TelePresence MX700 and MX800
API Reference Guide
xCommand Camera Preset Edit
Edit a stored camera preset. You can change the name of the camera preset and its position in
the list that is returned by the xCommand Camera Preset List command. You can also change
whether or not this preset is the default position for the associated camera.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras and the Video Input switcher settings.
Requires user role: USER
USAGE:
xCommand Camera Preset Edit PresetId: PresetId [ListPosition: ListPosition]
[Na m e: "Name"] [DefaultProsition: DefaultProsition]
where
PresetId: Integer (1..35)
The ID of the camera preset you want to edit.
ListPosition: Integer (1..35)
The position in the list returned by the xCommand Camera Preset List command.
Name: String (0, 255)
The name of the camera preset. It will be used in the list returned by the xCommand
Camera Preset List command.
DefaultProsition: False/True
Defines whether or not this preset is the default position for the associated camera.
Note that each camera can only have one default position, so if set, the old default
preset will automatically be marked as not default.
xCommand Camera Preset List
List information about available camera presets.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras plus the Video Input switcher settings.
Requires user role: USER
USAGE:
xCommand Camera Preset List CameraId: CameraId [DefaultPosition:
Defa ultPosition]
where
CameraId: Integer (1..7)
Only list presets for the specified camera.
DefaultPosition: False/True
List default positions only, or only those that are not default positions.
xCommand Camera Preset Remove
Remove a camera preset.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras plus the Video Input switcher settings.
Requires user role: USER
USAGE:
xCommand Camera Preset Remove PresetId: PresetId
where
PresetId: Integer (1..35)
The ID of the camera preset you want to remove.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xCommand

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30