Cisco TelePresence MX200 G2 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 30
Cisco TelePresence MX700 and MX800
API Reference Guide
Dos and don’ts
Here are some best practices when programming the Cisco
MX series API.
DO use complete commands
You should always use complete commands when program-
ming, i.e. always use xConfiguration Video instead of xconf
vid. The shortcuts can be used for searches in the API on the
command line, but not for programming. The reason for this is
that you might end up with ambiguous code when additional
commands are added to the API.
DO NOT subscribe to unnecessary feedback
Subscribing to too much feedback may congest the control
application. Although the amount of feedback may seem fine
in the current version, the amount of feedback may grow in
future releases.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

About the API

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30