Cisco TelePresence MX200 G2 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 50
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Conference MaxReceiveCallRate
Define the maximum receive bit rate to be used when placing or receiving calls. Note that this
is the maximum bit rate for each individual call; use the Conference MaxTotalReceiveCallRate
setting to set the aggregated maximum for all simultaneous active calls.
Requires user role: ADMIN
Default value: 6000
USAGE:
xConfiguration Conference MaxReceiveCallRate: MaxReceiveCallRate
where
MaxReceiveCallRate : Integer (64..6000)
Set the maximum receive call rate (kbps).
xConfiguration Conference MaxTransmitCallRate
Define the maximum transmit bit rate to be used when placing or receiving calls. Note that this
is the maximum bit rate for each individual call; use the Conference MaxTotalTransmitCallRate
setting to set the aggregated maximum for all simultaneous active calls.
Requires user role: ADMIN
Default value: 6000
USAGE:
xConfiguration Conference MaxTransmitCallRate: MaxTransmitCallRate
where
MaxTransmitCallRate : Integer (64..6000)
Set the maximum transmitt call rate (kbps).
xConfiguration Conference MaxTotalReceiveCallRate
This configuration applies when using a video system's built-in MultiSite feature (optional) to
host a multipoint video conference.
Define the maximum overall receive bit rate allowed. The bit rate will be divided fairly among
all active calls at any time. This means that the individual calls will be up-speeded or down-
speeded as appropriate when someone leaves or enters a multipoint conference, or when a
call is put on hold (suspended) or resumed.
The maximum receive bit rate for each individual call is defined in the Conference
MaxReceiveCallRate setting.
Requires user role: ADMIN
Default value: 10000
USAGE:
xConfiguration Conference MaxTotalReceiveCallRate: MaxTotalReceiveCallRate
where
MaxTotalReceiveCallRate : Integer (64..10000)
Set the maximum receive call rate (kbps).
xConfiguration Conference MaxTotalTransmitCallRate
This configuration applies when using a video system's built-in MultiSite feature (optional) to
host a multipoint video conference.
Define the maximum overall transmit bit rate allowed. The bit rate will be divided fairly among
all active calls at any time. This means that the individual calls will be up-speeded or down-
speeded as appropriate when someone leaves or enters a multipoint conference, or when a
call is put on hold (suspended) or resumed.
The maximum transmit bit rate for each individual call is defined in the Conference
MaxTransmitCallRate setting.
Requires user role: ADMIN
Default value: 10000
USAGE:
xConfiguration Conference MaxTotalTransmitCallRate: MaxTotalTransmitCallRate
where
MaxTotalTransmitCallRate : Integer (64..10000)
Set the maximum transmit call rate (kbps).
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xConfiguration

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30