D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 160
Cisco TelePresence MX700 and MX800
API Reference Guide
xStatus Provisioning Software UpgradeStatus VersionId
Shows the version ID of the software currently being uploaded and installed.
Value space of the result returned:
String
Example:
xStatus Provisioning Software UpgradeStatus VersionId
*s Provisioning Software UpgradeStatus VersionId: "s52010ce8 _ 0 _ 0.pkg"
** end
xStatus Provisioning Status
Shows the status of the provisioning.
Failed: The provisioning failed.
AuthenticationFailed: The authentication failed.
Provisioned: The endpoint is provisioned.
Idle: The provisioning is not active.
NeedConfig: The endpoint needs to be configured.
ConfigError: An error occurred during configuration.
Value space of the result returned:
Failed/AuthenticationFailed/Provisioned/Idle/NeedConfig/ConfigError
Example:
xStatus Provisioning Status
*s Provisioning Status: Provisioned
** end
Proximity status
xStatus Proximity
Shows the top level overview of the proximity status.
xStatus Proximity Services Availability
Shows whether proximity services are available on the endpoint.
Available: Proximity mode has been enabled with the command xConfiguration Proximity Mode
and one or more of the proximity services have been enabled with xConfiguration Proximity
Services commands.
Disabled: Proximity mode has been disabled with xConfiguration Proximity Mode, or none of the
services have been enabled with the xConfiguration Proximity Services commands.
Deactivated: Proximity services have been deactivated with the command xCommand Proximity
Services Deactivate.
Example:
xStatus Proximity Services Availability
*s Proximity Services Availability: Disabled
** end
To Next Page
Loading...
Need help?
General
