Cisco TelePresence MX200 G2 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 114
Cisco TelePresence MX700 and MX800
API Reference Guide
xCommand Phonebook Folder Add
Phonebook entries can be stored in folders. Use this command to add a folder to the local
phonebook. The command returns the FolderId, which is a unique string that identifies the
folder; typically the format is “localGroupId-n”.
Requires user role: USER
USAGE:
xCommand Phonebook Folder Add Na m e: "Name" [ParentFolderId: "ParentFolderId"]
where
Name: String (0, 255)
The name of the folder.
ParentFolderId: String (0, 255)
The unique identifier for the parent folder. The identifier will be returned by an
xCommand Phonebook Search command. It was also returned when the xCommand
Phonebook Folder Add command was issued to make the parent folder.
xCommand Phonebook Folder Delete
Delete an existing folder from the local phonebook.
Requires user role: USER
USAGE:
xCommand Phonebook Folder Delete FolderId: "FolderId"
where
FolderId: String (0, 255)
The unique identifier for the folder. The identifier will be returned by an xCommand
Phonebook Search command. It was also returned when the xCommand Phonebook
Folder Add command was issued to make the folder.
xCommand Phonebook Folder Modify
Modify an existing phonebook folder.
Requires user role: USER
USAGE:
xCommand Phonebook Folder Modify FolderId: "FolderId" [Name: "Name"]
[ParentFolderId: "Paren tFolderId"]
where
FolderId: String (0, 255)
The unique identifier for the folder. The identifier will be returned by an xCommand
Phonebook Search command. It was also returned when the xCommand Phonebook
Folder Add command was issued to make the folder.
Name: String (0, 255)
The name of the contact.
ParentFolderId: String (0, 255)
The unique identifier for the parent folder. The identifier will be returned by an
xCommand Phonebook Search command. It was also returned when the xCommand
Phonebook Folder Add command was issued to make the parent folder.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xCommand

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30