D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 152
Cisco TelePresence MX700 and MX800
API Reference Guide
Network status
xStatus Network
Shows the top level overview of the network status.
xStatus Network 1 CDP Address
Returns the first network address of both receiving and sending devices.
Value space of the result returned:
String
Example:
xStatus Network CDP Address
*s Network 1 CDP Address: "192.0.1.20"
** end
xStatus Network 1 CDP Capabilities
Describes the functional capability for the switch in form of a device type. See documentation
for CDP protocol for more information.
Value space of the result returned:
String
Example:
xStatus Network CDP Capabilities
*s Network 1 CDP Capabilities: "0x0029"
** end
xStatus Network 1 CDP DeviceId
Identifies the name of the switch in form of a character string.
Value space of the result returned:
String
Example:
xStatus Network CDP DeviceId
*s Network 1 CDP DeviceId: "123456.company.com"
** end
xStatus Network 1 CDP Duplex
Indicates the status (duplex configuration) of the CDP broadcast interface. Used by network
operators to diagnose connectivity problems between adjacent network elements.
Value space of the result returned:
String
Example:
xStatus Network CDP Duplex
*s Network 1 CDP Duplex: "Full"
** end
xStatus Network 1 CDP Platform
Returns the hardware platform name of the switch connected to the endpoint.
Value space of the result returned:
String
Example:
xStatus Network CDP Platform
*s Network 1 CDP Platform: "cisco WS-C3750X-48P"
** end
xStatus Network 1 CDP PortID
Returns the identification the switch uses of the port the endpoint is connected to.
Value space of the result returned:
String
Example:
xStatus Network CDP PortID
*s Network 1 CDP PortID: "GigabitEthernet1/0/23"
** end
To Next Page
Loading...
Need help?
General
