Cisco TelePresence MX200 G2 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 116
Cisco TelePresence MX700 and MX800
API Reference Guide
Presentation commands
xCommand Presentation Start
Open a media stream from the selected presentation source.
Requires user role: USER
USAGE:
xCommand Presentation Start [PresentationSource: PresentationSource]
[SendingMode: Send ingMode] [ConnectorId: ConnectorId] [Instance: Instance]
where
PresentationSource: Integer (1..4)
Select the video input source to be used for presentation, identified by source number.
SendingMode: LocalRemote/LocalOnly
Select whether the presentation is shown locally or locally and remotely.
ConnectorId: Integer (1..5)
Select the video input source to be used for presentation, identified by connectorId.
Instance: New/1/2/3/4/5/6
Select which local presentation instance you wish to start.
xCommand Presentation Stop
Stop the media stream from the presentation source.
Requires user role: USER
USAGE:
xCommand Presentation Stop [Insta nce: Instance] [PresentationSource:
PresentationSource]
where
Instance: 1/2/3/4/5/6
Select which local presentation you wish to stop, identified by presentation instance.
PresentationSource: Integer (1..4)
Select which local presentation you wish to stop, identified by source number.
Provisioning commands
xCommand Provisioning CompleteUpgrade
Starts installing the software upgrade if you wish to install it before it is set to do so.
Requires user role: USER
USAGE:
xCommand Provisioning CompleteUpgrade
xCommand Provisioning PostponeUpgrade
Postpones the installing of the software upgrade.
Requires user role: USER
USAGE:
xCommand Provisioning PostponeUpgrade SecondsToPostpone: SecondsToPostpone
where
SecondsToPostpone: Integer (0..65534)
Set how long to postpone the upgrade. The value is in seconds.
xCommand Provisioning CUCM CTL Delete
Delete the stored CTL and ITL files (CTL: Certificate Trust List, ITL: Identity Trust List).
Requires user role: USER
USAGE:
xCommand Provisioning CUCM CTL Delete
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xCommand

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30