Cisco TelePresence MX200 G2 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 59
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Network [1] IPv4 SubnetMask
Define the IPv4 network subnet mask. Applicable only when the Network IPv4 Assignment is
set to Static.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Network n IPv4 SubnetMask: "SubnetMask"
where
n : Index that identifies the network. Range: 1..1
SubnetMask : String (0, 64)
A valid IPv4 address.
xConfiguration Network [1] IPv6 Assignment
Define how the system will obtain its IPv6 address and the default gateway address. This
setting only applies to systems on IPv6 networks.
Requires user role: ADMIN
Default value: Autoconf
USAGE:
xConfiguration Network n IPv6 Assign ment: Assignment
where
n : Index that identifies the network. Range: 1..1
Assignment : Static/DHCPv6/Autoconf
Static: The codec and gateway IP addresses must be configured manually using the
Network IPv6 Address and Network IPv6 Gateway settings. The options, for example
NTP and DNS server addresses, must either be set manually or obtained from a
DHCPv6 server. The Network IPv6 DHCPOptions setting determines which method to
use.
DHCPv6: All IPv6 addresses, including options, will be obtained from a DHCPv6 server.
See RFC 3315 for a detailed description. The Network IPv6 DHCPOptions setting will
be ignored.
Autoconf: Enable IPv6 stateless autoconfiguration of the IPv6 network interface. See
RFC 4862 for a detailed description. The options, for example NTP and DNS server
addresses, must either be set manually or obtained from a DHCPv6 server. The
Network IPv6 DHCPOptions setting determines which method to use.
xConfiguration Network [1] IPv6 Address
Define the static IPv6 network address for the system. Applicable only when the Network IPv6
Assignment is set to Static.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Network n IPv6 Add ress: "Address"
where
n : Index that identifies the network. Range: 1..1
Address : String (0, 64)
A valid IPv6 address.
xConfiguration Network [1] IPv6 Gateway
Define the IPv6 network gateway address. This setting is only applicable when the Network
IPv6 Assignment is set to Static.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration Network n IPv6 Gateway: "Gateway"
where
n : Index that identifies the network. Range: 1..1
Gateway : String (0, 64)
A valid IPv6 address.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xConfiguration

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30