Cisco TelePresence MX200 G2 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 123
Cisco TelePresence MX700 and MX800
API Reference Guide
xCommand UserInterface Message Prompt Display
Display a small window on screen with a title, text and up to five options for response from the
user. The message is displayed on screen until the user gives a response, or until the system
receives the following command xCommand Message Prompt Clear.
Use the xFeedback commands to monitor the feedback from the user. Read more about the
xFeedback commands in the API introduction section in this guide.
Title:
Text:
FeedbackId:
Option.1 to Option.5:
Requires user role: ADMIN
USAGE:
xCommand UserInterface Message Prompt Display [Title: "Title"] Text: "Text"
[Feed backId: "FeedbackId"] [O ption.1: "O p tio n.1"] [O pt ion.2: "Option.2"] [O pt io n.3:
"O ption.3"] [O p t io n.4: "O p t io n.4 "] [O pt io n.5: "Option.5"]
where
Title: String (0, 255)
Enter the message title.
Text: String (0, 255)
Enter the text line to be displayed. The <p> and <br> HTML tags will result in line breaks
as normal; any other tags will appear as plain text.
FeedbackId: String (0, 255)
To identify the feedback enter a FeedbackId.
Option.1: String (0, 255)
Enter the text to appear on the feedback options.
Option.2: String (0, 255)
Enter the text to appear on the feedback options.
Option.3: String (0, 255)
Enter the text to appear on the feedback options.
Option.4: String (0, 255)
Enter the text to appear on the feedback options.
Option.5: String (0, 255)
Enter the text to appear on the feedback options.
xCommand UserInterface Message Prompt Response
Give a response to the xCommand Message Prompt Display.
Use the xFeedback commands to monitor the feedback from the user. Read more about the
xFeedback commands in the API introduction section in this guide.
Requires user role: USER
USAGE:
xCommand UserInterface Message Prompt Response [FeedbackId: "FeedbackId"]
OptionId: OptionId
where
FeedbackId: String (0, 255)
The FeedbackId corresponds to the FeedbackId given by the xCommand Message
Prompt Display command.
OptionId: Integer (1..5)
The OptionId corresponds to the OptionIds given as possible responses in the
xCommand Message Prompt Display command.
xCommand UserInterface Message TextLine Clear
Clears the text line which was defined by the xCommand Message TextLine Display command.
Requires user role: USER
USAGE:
xCommand UserInterface Message TextLine Clear
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xCommand

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30