D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 110
Cisco TelePresence MX700 and MX800
API Reference Guide
xCommand Peripherals Pairing DeviceDiscovery Start
Start device discovery to detect ISDN Links in the same network.
Requires user role: ADMIN
USAGE:
xCommand Peripherals Pairing DeviceDiscovery Start [AutoPairing: AutoPairing]
[DeviceType: DeviceTy pe] [Timeout: Timeout]
where
AutoPairing: On/Off
You can select to automatically pair the detected device to the endpoint.
DeviceType: ISDNLink
Only look for ISDN Link.
Timeout: Integer (3..60)
Set a maximum time for the search from 3 to 60 seconds.
xCommand Peripherals Pairing Pair
Pair an ISDN Link to an endpoint.
Requires user role: ADMIN
USAGE:
xCommand Peripherals Pairing Pair Mac Add ress: "MacAddress"
where
MacAddress: String (1, 1450)
Enter the MAC address for the ISDN Link you wish to pair to the endpoint.
xCommand Peripherals Pairing Unpair
Unpair endpoint from an ISDN Link, when the two have contact.
Requires user role: ADMIN
USAGE:
xCommand Peripherals Pairing Unpair M acAd d ress: "MacAddress"
where
MacAddress: String (1, 100)
MacAddress: Enter the MAC address for the ISDN Link you wish to unpair from the
endpoint.
xCommand Peripherals Purge
Force unpair an endpoint from an ISDN Link when a connection has been lost. Note: You must
also unpair the ISDN Link to be able to pair it to another endpoint.
Requires user role: USER
USAGE:
xCommand Peripherals Purge ID: "ID"
where
ID: String (1, 100)
Mac address of the ISDN Link in the format "xx:xx:xx:xx:xx:xx".
To Next Page
Loading...
Need help?
General
