D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 94
Cisco TelePresence MX700 and MX800
API Reference Guide
xCommand Audio Volume Set
Set the volume on the endpoint to a specified level.
Requires user role: USER
USAGE:
xCommand Audio Volume Set Level: Level
where
Level: Inte g er (0..10 0)
Select gain level. The default level 70 equals 0dB gain. Level 100 equals 15db gain.
xCommand Audio Volume SetToDefault
Set the current volume level as the default for the endpoint.
Requires user role: USER
USAGE:
xCommand Audio Volume SetToDefault
xCommand Audio Volume Unmute
Set the volume on the endpoint back on after muting.
Requires user role: USER
USAGE:
xCommand Audio Volume Unmute
Bookings commands
xCommand Bookings Clear
Clear the current stored list of bookings.
Requires user role: USER
USAGE:
xCommand Bookings Clear
xCommand Bookings List
List the stored bookings for the system. The list of booking details is received from the
management system. All parameters are optional, and can be used to limit the search result.
If no parameters are set, past, present and future bookings are all listed. To avoid listing
bookings from yesterday and before, use DayOffset = 0.
Requires user role: USER
USAGE:
xCommand Bookings List [Days: Days] [DayOffset: DayOffset] [Limit: Li mit]
[Offset: Offset]
where
Days: Integer (1..365)
Number of days to retrieve bookings from.
DayOffset: Integer (0..365)
Which day to start the search from (today: 0, tomorrow: 1…).
Limit: Integer (1..65534)
Max number of bookings to list.
Offset: Integer (0..65534)
Offset number of bookings for this search.
To Next Page
Loading...
Need help?
General
