Cisco TelePresence MX200 G2 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 171
Cisco TelePresence MX700 and MX800
API Reference Guide
xStatus Video Input Connector [n] SignalState
Shows the signal state for the specified input.
Unknown: The signal format is unknown.
OK: A signal is detected and the signal format is supported.
Unsupported: A signal is detected, but the signal format is not supported.
Value space of the result returned:
OK/Unknown/Unsupported
Example:
xStatus Video Input Connector 1 SignalState
*s Video Input Connector 1 SignalState: OK
** end
xStatus Video Input Connector [n] SourceId
Shows the identifer of the input source that the connector is associated with.
Value space of the result returned:
Integer
Example:
xStatus Video Input Connector 1 SourceId
*s Video Input Connector 1 SourceId: 1
** end
xStatus Video Input Connector [n] Type
Shows which connector type it is.
Value space of the result returned:
Composite/DVI/HDMI/Unknown/YC
Example:
xStatus Video Input Connector 1 Type
*s Video Input Connector 1 Type: HDMI
** end
xStatus Video Input MainVideoSource
Returns the local video input currently used as the main source. The main video source is set
with the xConfiguration Video DefaultMainSource command.
Value space of the result returned:
Integer
Example:
xStatus Video Input MainVideoSource
*s Video Input MainVideoSource: 1
** end
xStatus Video Input Source [n] ConnectorId
Shows the identifier of the connector that is associated with the input source.
Value space of the result returned:
Integer
Example:
xStatus Video Input Source 1 ConnectorId
*s Video Input Source 1 ConnectorId: 1
** end
xStatus Video Input Source [n] FormatStatus
Shows the resolution format status for the video input source.
Value space of the result returned:
Ok/OutOfRange/NotFound/Interlaced/Error/Unknown
Example:
xStatus Video Input Source 1 FormatStatus
*s Video Input Source 1 Resolution FormatStatus: Ok
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xStatus

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30