Cisco TelePresence MX200 G2 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 117
Cisco TelePresence MX700 and MX800
API Reference Guide
xCommand Provisioning CUCM CTL Show
Shows the content of the installed Certificate Trust List file (CTL), if it exists. Each entry
displayed contains the information about one specific certificate. If a certificate has been
deleted in CTL, it is marked accordingly in the output.
Requires user role: USER
USAGE:
xCommand Provisioning CUCM CTL Show
xCommand Provisioning StartUpgrade
The codec software can be upgraded from the provisioning server. When starting the upgrade
the software is automatically downloaded and installed. The codec reboots to complete the
software upgrade.
Requires user role: USER
USAGE:
xCommand Provisioning StartUpgrade
Proximity commands
xCommand Proximity Services Activate
Reactivate the Proximity services that were deactivated with xCommand Proximity Services
Deactivate.
Requires user role: USER
USAGE:
xCommand Proximity Services Activate
xCommand Proximity Services Deactivate
This command deactivates all proximity services on the endpoint. To reactivate proximity
services use the command xCommand Proximity Services Activate.
Requires user role: USER
USAGE:
xCommand Proximity Services Deactivate
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xCommand

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30