Cisco TelePresence MX200 G2 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 149
Cisco TelePresence MX700 and MX800
API Reference Guide
Diagnostics status
xStatus Diagnostics
Shows the top level overview of the diagnostics. The example shows the status for an ongoing
call. The identities of the call and channels are used when querying additional information.
xStatus Diagnostics Message [n] Description
A description of the current diagnostics alerts.
Value space of the result returned:
String
Example:
xStatus Diagnostics Message Description
*s DiagnosticsResult Message 1 Description: "IP configuration incomplete"
** end
xStatus Diagnostics Message [n] Level
Returns information on the level of the diagnostics message.
Error: There is an error in the system. The system can still be used, but there can be some
restrictions.
Warning: A problem is detected and a more specific report follows indicating the exact problem.
Critical: The warning level is critical. The system cannot be used.
Value space of the result returned:
Error/Warning/Critical
Example:
xStatus Diagnostics Message 4 Level
*s Diagnostics Message 4 Level: Warning
** end
xStatus Diagnostics Message [n] References
Additional information on the diagnostics alert, if available.
Value space of the result returned:
String
Example:
xStatus Diagnostics Message 10 References
*s Diagnostics Message 10 References: "delay=190"
** end
xStatus Diagnostics Message [n] Type
Returns information on the results of the latest diagnostics on the system.
Value space of the result returned:
CAPFOperationState/CTLinstallation/CUCMVendorConfigurationFile/
CallProtocolDualStackConfig/CallProtocolIPStackPlatformCompatibility/
CallProtocolVcsProvisioningCompatibility/CameraId/CameraPairing/CameraSerial/
CameraSoftwareVersion/CameraStatus/CamerasDetected/ConfigurationFile/
DefaultCallProtocolRegistered/EthernetDuplexMatches/FollowPresenterCameraConnection/
H320GatewayStatus/H323GatekeeperStatus/HasValidReleaseKey/IpCameraStatus/
IPv4Assignment/IPv6Assignment/IPv6Mtu/ISDNLinkCompatibility/ISDNLinkIpStack/
ITLinstallation/InvalidSIPTransportConfig/LockDown/NetLinkStatus/NetSpeedAutoNegotiated/
NTPStatus/OSDVideoOutput/OutputConnectorLocations/ProvisioningStatus/
SIPEncryption/SIPListenPortAndOutboundMode/SIPProfileRegistration/SIPProfileType/
SelectedVideoInputSourceConnected/SipIceAndAnatConflict/TLSVerifyRequiredCerts/
TouchPanelConnection/TurnBandwidth/UdpPortRangeViolation/ValidPasswords/
VideoFromInternalCamera/ VideoInputStability/SpeakerTrackFrontPanelMountedCorrectly/
SpeakerTrackMicrophoneConnection/SpeakerTrackVideoInputs/
SpeakerTrackEthernetConnection/ANATOnVCS/ECReferenceDelay/AudioPairingSNR/
AudioInternalSpeakerDisabled/AbnormalCallTermination/HasActiveCallProtocol/
SipOrH323ButNotBothEnabled/PresentationSourceSelection/SoftwareUpgrade/
ContactInfoMismatch
Example:
xStatus Diagnostics Message type
*s Diagnostics Message 1 Type: InvalidAdminPassword
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xStatus

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30