EasyManuals Logo

Cisco TelePresence MX200 G2 Reference Guide

Cisco TelePresence MX200 G2
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 43
Cisco TelePresence MX700 and MX800
API Reference Guide
xConfiguration Audio Output Line [1..6] Mode
Define the mode for the audio output line.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration Audio Output Line n Mode: M od e
where
Mode
: Off/On
Off: Disable the audio output line.
On: Enable the audio output line.
Cameras configuration
xConfiguration Cameras Camera [1..7] AssignedSerialNumber
The camera ID is the number n in Camera [n]. By default, the camera ID is assigned automati-
cally to a camera. If EDID information is not passed on from the camera to the codec, the
camera ID is not persistent after a reboot. This means that a camera may get a new camera ID
when the codec (video system) is restarted.
You should use the Cameras Camera AssignedSerialNumber setting to cater for configurations
where the codec does not receive EDID information from multiple cameras. This setting allows
you to manually assign a camera ID to a camera by associating the camera ID with the camera's
serial number. The setting is persistent until the codec is factory reset.
Typical situations where the codec does not receive EDID information are: when you connect
a Cisco TelePresence 60 camera using 3G-SDI; when you connect a Cisco TelePresence 60
(Cisco PrecisionHD 1080p4xS2) camera; when you use an HDMI repeater that does not pass
on EDID information.
The default value is an empty string.
Requires user role: USER
Default value: ""
USAGE:
xConfiguration Cameras Camera n AssignedSerialNumber: "AssignedSerialNumber"
where
AssignedSerialNumber
: String (0, 20)
The camera's serial number.
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xConfiguration

Table of Contents

Other manuals for Cisco TelePresence MX200 G2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco TelePresence MX200 G2 and is the answer not in the manual?

Cisco TelePresence MX200 G2 Specifications

General IconGeneral
Resolution1920 x 1080
Network10/100/1000 Ethernet
Product TypeVideo conferencing system
Display Size42 in
CameraPrecisionHD 1080p Camera
CodecCisco TelePresence Codec
Video InputsHDMI, DVI-I
Video OutputsHDMI
ControlCisco Touch 10
Video StandardsH.264
ConnectivityHDMI
Codec SupportH.264
Resolution (fps)1080p30

Related product manuals