D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 153
Cisco TelePresence MX700 and MX800
API Reference Guide
xStatus Network 1 CDP PrimaryMgmtAddress
Returns the management address used to configure and monitor the switch the endpoint is
connected to.
Value space of the result returned:
String
Example:
xStatus Network CDP PrimaryMgmtAddress
*s Network 1 CDP PrimaryMgmtAddress: "10.1.1.2"
** end
xStatus Network 1 CDP SysName
Returns the SysName as configured in the switch the endpoint is connected to.
Value space of the result returned:
String
Example:
xStatus Network CDP SysName
*s Network 1 CDP SysName: ""
** end
xStatus Network 1 CDP SysObjectID
Returns the SysObjectID as configured in the switch the endpoint is connected to.
Value space of the result returned:
String
Example:
xStatus Network CDP SysObjectID
*s Network 1 CDP SysObjectID: ""
** end
xStatus Network 1 CDP Version
Returns information about the software release version the switch is running.
Value space of the result returned:
String
Example:
xStatus Network 1 CDP Version
*s Network 1 CDP Version: "Cisco IOS Software, C3560CX Software (C3560CX-
UNIVERSALK9-M), Version 15.2(3)E, RELEASE SOFTWARE (fc4)*Technical Support:
http://www.cisco.com/techsupport*Copyright (c) 1986-2014 by Cisco Systems,
Inc.*Compiled Sun 07-Dec-14 13:15 by prod _ rel _ team"
** end
xStatus Network 1 CDP VoIPApplianceVlanID
Identifies the VLAN used for VoIP traffic from the endpoint to the switch. For more information
see documentation of the IEEE 802.1Q protocol.
Value space of the result returned:
String
Example:
xStatus Network CDP VoIPApplianceVlanID
*s Network 1 CDP VoIPApplianceVlanID: "300"
** end
xStatus Network 1 CDP VTPMgmtDomain
Returns the switch’s configured VTP management domain name-string.
Value space of the result returned:
String
Example:
xStatus Network CDP VTPMgmtDomain
*s Network 1 CDP VTPMgmtDomain: "anyplace"
** end
To Next Page
Loading...
Need help?
General
