Cisco TelePresence MX200 G2 Reference Guide

D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 155
Cisco TelePresence MX700 and MX800
API Reference Guide
xStatus Network 1 IPv4 SubnetMask
Shows the subnet mask which determines which subnet an IPv4 address belongs to.
Value space of the result returned:
String
Example:
xStatus Network 1 IPv4 SubnetMask
*s Network 1 IPv4 SubnetMask: "255.255.255.0"
** end
xStatus Network 1 IPv6 Address
Shows the IPv6 address that uniquely identifies this system.
Value space of the result returned:
String
Example:
xStatus Network 1 IPv6 Address
*s Network 1 IPv6 Address: ""
** end
xStatus Network 1 IPv6 Gateway
Shows the address of the IPv6 gateway.
Value space of the result returned:
String
Example:
xStatus Network 1 IPv6 Gateway
*s Network 1 IPv6 Gateway: ""
** end
xStatus Network 1 VLAN Voice VlanId
The feedback shows the VLAN Voice ID; or Off if the VLAN Voice Mode is not enabled.
Value space of the result returned:
Off/1..4094
Example:
xStatus Network 1 VLAN Voice VlanId
*s Network 1 VLAN Voice VlanId: "Off"
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus

xStatus

Cisco TelePresence MX200 G2 Specifications

General

Resolution	1920 x 1080
Network	10/100/1000 Ethernet
Product Type	Video conferencing system
Display Size	42 in
Camera	PrecisionHD 1080p Camera
Codec	Cisco TelePresence Codec
Video Inputs	HDMI, DVI-I
Video Outputs	HDMI
Control	Cisco Touch 10
Video Standards	H.264
Connectivity	HDMI
Codec Support	H.264
Resolution (fps)	1080p30