D15335.02 Cisco TelePresence MX700 and MX800 API Reference Guide CE8.0, FEBRUARY 2016.
Copyright © 2016 Cisco Systems, Inc. All rights reserved. 140
Cisco TelePresence MX700 and MX800
API Reference Guide
xStatus Call [n] FacilityServiceId
When calling a facility service, the facility service id is shown. Otherwise the value 0 is returned.
Value space of the result returned:
0..5
Example:
xStatus Call FacilityServiceId
*s Call 3 FacilityServiceId: 1
** end
xStatus Call [n] HoldReason
Shows the reason the current outgoing call was put on hold.
Conference: On hold while the call is being merged into a conference.
Transfer: On hold while the call is being transferred.
None: All other instances.
Value space of the result returned:
Conference/Transfer/None
Example:
xStatus Call 2 HoldReason
*s Call 2 HoldReason: None
** end
xStatus Call [n] PlacedOnHold
Shows the placed on hold status of the call. You can run the command xStatus Call to find the
call identity.
Value space of the result returned:
True/False
Example:
xStatus Call 27 PlacedOnHold
*s Call 27 PlacedOnHold: False
** end
xStatus Call [n] Protocol
Shows the call protocol of the incoming or outgoing call. You can run the command xStatus Call
to find the call identity.
Value space of the result returned:
H320/H323/SIP
Example:
xStatus Call 27 Protocol
*s Call 27 Protocol: "h323"
** end
xStatus Call [n] ReceiveCallRate
Shows the receive bandwidth in the call in kilobits per second (kbps). You can run the
command xStatus Call to find the call identity.
Value space of the result returned:
Integer
Example:
xStatus Call 27 ReceiveCallRate
*s Call 27 ReceiveCallRate: 4000
** end
xStatus Call [n] RemoteNumber
Shows the remote (far end) number or URI of an incoming or outgoing call. You can run the
command xStatus Call to find the call identity.
Value space of the result returned:
String
Example:
xStatus Call 27 RemoteNumber
*s Call 27 RemoteNumber: "5585232"
** end
To Next Page
Loading...
Need help?
General
