Cisco TelePresence SX80 - Httpfeedback Commands

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 113
Cisco TelePresence SX80 API Reference Guide
HttpFeedback commands
xCommand HttpFeedback Deregister
Deregister XML feedback over HTTP(S).
Requires user role: USER
Parameters:
FeedbackSlot(r): <1..4>
Example:
xCommand HttpFeedback Deregister FeedbackSlot:1
xCommand HttpFeedback Register
Register the system to a HTTP(S) server to return XML feedback over HTTP(S) to specific URLs.
FeedbackSlot: You can have from 1 to 4 slots for feedback.
ServerUrl: Define the URL for the HTTP(S) server.
Expression[1..15]: What parts of the Status and Configuration XML documents to monitor are speci-
fied by XPath expressions. You can have from 1 to 15 XPath expressions.
Requires user role: USER
Parameters:
FeedbackSlot: <1..4>
ServerUrl(r): <S: 1, 2048>
Expression[1..15]: <S: 1, 255>
Example:
xCommand HttpFeedback Register FeedbackSlot:1 ServerUrl:10.47.19.41
Expression[1]:Status/Video Expression[2]:Status/Audio Expression[3]:Status/
Call Expression[4]:Status/Conference
Key commands
xCommand Key Click
Not applicable for this product.
xCommand Key Press
Not applicable for this product.
xCommand Key Release
Not applicable for this product.
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatus
xCommand