Cisco TelePresence SX80 User Manual

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 201
Cisco TelePresence SX80 API Reference Guide
xStatus Provisioning Software Current CompletedAt
Shows date and time for when the current software upgrade was completed.
Value space of the result returned:
<String>
Example:
xStatus Provisioning Software Current CompletedAt
*s Provisioning Software Current CompletedAt: "2011-06-07T07:20:03Z"
** end
xStatus Provisioning CUCM CAPF Mode
Shows the authentication mode required for a pending CAPF operation, if any.
IgnoreAuth: No pending or ongoing CAPF operation.
NullAuth: Pending or ongoing CAPF operation that does not require authentication.
StringAuth: Pending or ongoing CAPF operation that requires string authentication.
LSCAuth: Pending or ongoing CAPF operation that requires authentication by Locally Significant
Certificate.
MICAUth: Pending or ongoing CAPF operation that requires authentication by Manufacturer Installed
Certificate.
Value space of the result returned:
<IgnoreAuth/NullAuth/StringAuth/LSCAuth/MICAuth>
Example:
xStatus Provisioning CUCM CAPF Mode
*s Provisioning CUCM CAPF Mode: IgnoreAuth
** end
xStatus Provisioning CUCM CAPF ServerName
Shows the CAPF server name. This can be a hostname, a FQDN or an IP address.
Value space of the result returned:
<IgnoreAuth/NullAuth/StringAuth/LSCAuth/MICAuth>
Example:
xStatus Provisioning CUCM CAPF ServerName
*s Provisioning CUCM CAPF ServerName: "192.168.0.1"
** end
xStatus Provisioning CUCM CAPF ServerPort
Shows the port number to be used for CAPF operations.
Value space of the result returned:
<Integer>
Example:
xStatus Provisioning CUCM CAPF ServerPort
*s Provisioning CUCM CAPF ServerPort: 3804
** end
xStatus Provisioning CUCM CAPF LSC
Shows whether a Locally Significant Certificate (LSC) is installed or not.
Value space of the result returned:
<NotInstalled/Installed>
Example:
xStatus Provisioning CUCM CAPF LSC
*s Provisioning CUCM CAPF LSC: NotInstalled
** end
xStatus Provisioning CUCM CAPF OperationState
Shows the state of the current CAPF operation, if any.
Pending: A CAPF operation is pending.
NonPending: There is no CAPF operation in process.
InProgress: A CAPF operation is in progress.
Failed: The CAPF operation has failed.
Value space of the result returned:
<Pending/NonPending/InProgress/Failed>
Example:
xStatus Provisioning CUCM CAPF OperationState
*s Provisioning CUCM CAPF OperationState: NonPending
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g