Cisco TelePresence SX80 User Manual

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 216
Cisco TelePresence SX80 API Reference Guide
Video status
xStatus Video Input
Shows the top level overview of the video input status.
xStatus Video Monitors
Returns the monitor layout mode.
Single: The same layout is shown on all monitors.
Dual: The layout is distributed on two monitors.
DualPresentationOnly: All participants in the call will be shown on the first monitor, while the
presentation (if any) will be shown on the second monitor.
Quadruple: The layout is distributed on four monitors, so that each remote participant and the
presentation will be shown on separate monitors.
Value space of the result returned:
<Single/Dual/DualPresentationOnly/Triple/Quadruple>
Example:
xStatus Video Monitors
*s Video Monitors: Single
** end
xStatus Video Input Connector [n] Connected
Shows whether is something connected to the specified connector. Not all connections can be
detected.
Value space of the result returned:
<False/True/Unknown>
Example:
xStatus Video Input Connector 1 Connected
*s Video Input Connector 1 Connected: True
** end
xStatus Video Input Connector [n] SignalState
Shows the signal state for the specified input.
Unknown: The signal format is unknown.
OK: A signal is detected and the signal format is supported.
Unsupported: A signal is detected, but the signal format is not supported.
Value space of the result returned:
<OK/Unknown/Unsupported>
Example:
xStatus Video Input Connector 1 SignalState
*s Video Input Connector 1 SignalState: OK
** end
xStatus Video Input Connector [n] SourceId
Shows the identifer of the input source that the connector is associated with.
Value space of the result returned:
<Integer>
Example:
xStatus Video Input Connector 1 SourceId
*s Video Input Connector 1 SourceId: 1
** end
xStatus Video Input Connector [n] Type
Shows which connector type it is.
Value space of the result returned:
<Composite/DVI/HDMI/Unknown/YC>
Example:
xStatus Video Input Connector 1 Type
*s Video Input Connector 1 Type: HDMI
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g