Cisco TelePresence SX80 User Manual

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 163
Cisco TelePresence SX80 API Reference Guide
xStatus Conference Site [n] Capabilities FECC NumberOfPresets
Shows the number of presets available for the input sources at a far end site.
Value space of the result returned:
<1..15>
Example:
xStatus Conference Site 2 Capabilities FECC NumberOfPresets
*s Conference Site 2 Capabilities FECC NumberOfPresets: 15
** end
xStatus Conference Site [n] Capabilities FECC NumberOfSources
Shows the number of input sources that can be connected at a far end site.
Value space of the result returned:
<1..5>
Example:
xStatus Conference Site 2 Capabilities FECC NumberOfSources
*s Conference Site 2 Capabilities FECC NumberOfSources: 5
** end
xStatus Conference Site [n] Capabilities FECC Source [n] SourceId
Shows the ID of an input source that can be connected at a far end site.
Value space of the result returned:
<Integer>
Example:
xStatus Conference Site 2 Capabilities FECC Source 1 SourceId
*s Conference Site 2 Capabilities FECC Source 1 SourceId: 6
** end
xStatus Conference Site [n] Capabilities FECC Source [n] Name
Shows the name of an input source that can be connected at a far end site.
Value space of the result returned:
<String>
Example:
xStatus Conference Site 2 Capabilities FECC Source 1 Name
*s Conference Site 2 Capabilities FECC Source 1 Name: "Main camera"
** end
xStatus Conference Site [n] Capabilities FECC Source [n] Options
Shows available options for an input source that can be connected at a far end site (for a camera:
p=pan; t=tilt; z=zoom; f=focus).
Value space of the result returned:
<String>
Example:
xStatus Conference Site 2 Capabilities FECC Source 1 Options
*s Conference Site 2 Capabilities FECC Source 1 Options: "ptzf"
** end
xStatus Conference Site [n] Capabilities FECC Mode
Shows whether or not you have permission to control the input sources at a far end site.
On: Far end input source control is permitted.
Off: Far end input source control is not permitted.
Value space of the result returned:
<On/Off>
Example:
xStatus Conference Site 2 Capabilities FECC Mode
*s Conference Site 2 Capabilities FECC Mode: On
** end
xStatus Conference Site [n] Capabilities Presentation
Lists the presentation capabilities for other participants in the conference.
Value space of the result returned:
<True/False>
Example:
xStatus Conference Site 2 Capabilities Presentation
*s Conference Site 2 Capabilities Presentation: True
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g