Cisco TelePresence SX80 - Xstatus Video Layout Site [N] Output [N] Fullfamilyname; Xstatus Video Layout Site [N] Output [N] Graphicname; Xstatus Video Layout Site [N] Output [N] Frame [N] Positionx; Xstatus Video Layout Site [N] Output [N] Frame [N] Positiony

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 221
Cisco TelePresence SX80 API Reference Guide
xStatus Video Layout Site [n] Output [n] FullFamilyName
Shows the name, included information about self-view on/off, for the video layout family.
Value space of the result returned:
<String>
Example:
xStatus Video Layout Site 1 Output 1 FullFamilyName
*s Video Layout Site 1 Output 1 FullFamilyName:
"fullscreen-local-single-camctrl"
** end
xStatus Video Layout Site [n] Output [n] GraphicName
Shows the name of the graphic layout. The name identifies the layout used right now at the speci-
fied output.
NOTE: Note that while the FamilyName is constant as the long as the configurations on the system
does not change, the GraphicName varies depending on system state (the number of participants
for instance).
Value space of the result returned:
<String>
Example:
xStatus Video Layout Site 1 Output 1 GraphicName
*s Video Layout Site 1 Output 1 GraphicName: "full-pip"
** end
xStatus Video Layout Site [n] Output [n] Frame [n] PositionX
Shows the horizontal position of the upper left corner of the frame.
Value space of the result returned:
<0..10000>
Example:
xStatus Video Layout Site 1 Output 1 Frame 1 PositionX
*s Video Layout Site 1 Output 1 Frame 1 PositionX: 0
** end
xStatus Video Layout Site [n] Output [n] Frame [n] PositionY
Shows the vertical position of the upper left corner of the frame.
Value space of the result returned:
<0..10000>
Example:
xStatus Video Layout Site 1 Output 1 Frame 1 PositionY
*s Video Layout Site 1 Output 1 Frame 1 PositionY: 0
** end
xStatus Video Layout Site [n] Output [n] Frame [n] Width
Shows the width of the frame.
Value space of the result returned:
<0..10000>
Example:
xStatus Video Layout Site 1 Output 1 Frame 1 Width
*s Video Layout Site 1 Output 1 Frame 1 Width: 10000
** end
xStatus Video Layout Site [n] Output [n] Frame [n] Height
Shows the height of the frame.
Value space of the result returned:
<0..10000>
Example:
xStatus Video Layout Site 1 Output 1 Frame 1 Height
*s Video Layout Site 1 Output 1 Frame 1 Height: 10000
** end
xStatus Video Layout Site [n] Output [n] Frame [n] Layer
Shows the layer of the frame.
Value space of the result returned:
<1..6>
Example:
xStatus Video Layout Site 1 Output 1 Frame 1 Layer
*s Video Layout Site 1 Output 1 Frame 1 Layer: 1
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus