D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 97
Cisco TelePresence SX80 API Reference Guide
xCommand Audio VUMeter Stop
Stop collecting VU meter information for the connector identified by the ConnectorId and
ConnectorType parameters. Together these parameters uniquely identify the connector.
ConnectorId: The connector identifier is printed on the codec connector panel.
ConnectorType: Identifies whether it is an HDMI input connector, an audio line input connector or a
microphone connector.
Requires user role: USER
Parameters:
ConnectorType(r): <HDMI/Line/Microphone>
ConnectorId(r): <1..8>
Example:
xCommand Audio VUMeter Stop ConnectorType: Microphone ConnectorId: 1
xCommand Audio VUMeter StopAll
Stop collecting VU meter information for all connectors.
Requires user role: USER
Example:
xCommand Audio VUMeter StopAll
Bookings commands
xCommand Bookings Clear
Clear the current stored list of bookings.
Requires user role: USER
Example:
xCommand Bookings Clear