D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 96
Cisco TelePresence SX80 API Reference Guide
xCommand Audio Volume Decrease
Decrease the volume on the endpoint.
Requires user role: USER
Parameters:
Ste p s: <1..10>
Example:
xCommand Audio Volume Decrease Steps:3
xCommand Audio Volume Increase
Increase the volume on the endpoint.
Requires user role: USER
Parameters:
Ste p s: <1..10>
Example:
xCommand Audio Volume Increase Steps:3
xCommand Audio Volume Mute
Mute the volume on the endpoint.
Requires user role: USER
Example:
xCommand Audio Volume Mute
xCommand Audio Volume Set
Set the volume on the endpoint to a specified level.
Requires user role: USER
Parameters:
Level(r): <1..100>
Example:
xCommand Audio Volume Set Level:30
xCommand Audio Volume SetToDefault
Set the current volume level as the default for the endpoint.
Requires user role: USER
Example:
xCommand Audio Volume SetToDefault
xCommand Audio Volume UnMute
Unmute the volume on the endpoint.
Requires user role: USER
Example:
xCommand Audio Volume SetToDefault
xCommand Audio VUMeter Start
Start collecting VU meter information for the connector identified by the ConnectorId and
ConnectorType parameters. Together these parameters identify the connector.
ConnectorId: The connector identifier is printed on the codec connector panel.
ConnectorType: Identifies whether it is an HDMI input connector, an audio line input connector or a
microphone connector.
Requires user role: USER
Parameters:
ConnectorType(r): <HDMI/Line/Microphone>
ConnectorId(r): <1..8>
Example:
xCommand Audio VUMeter Start ConnectorType: Microphone ConnectorId: 1