Cisco TelePresence SX80 User Manual

D15107.0 5 Codec SX80 API Reference Guide TC7.3, OCTOBER 2015. Copyright © 2015 Cisco Systems, Inc. All rights reserved. 195
Cisco TelePresence SX80 API Reference Guide
xStatus Network 1 CDP VoIPApplianceVlanID
Identifies the VLAN used for VoIP traffic from the endpoint to the switch. For more information see
documentation of the IEEE 802.1Q protocol.
Value space of the result returned:
<String>
Example:
xStatus Network CDP VoIPApplianceVlanID
*s Network 1 CDP VoIPApplianceVlanID: "300"
** end
xStatus Network 1 DNS Domain Name
Shows the domain name.
Value space of the result returned:
<String>
Example:
xStatus Network DNS Domain Name
*s Network 1 DNS Domain Name: "company.com"
** end
xStatus Network 1 DNS Server [n] Address
Shows the IP address of the DNS server.
Value space of the result returned:
<String>
Example:
xStatus Network DNS Server 1 Address
*s Network 1 DNS Server 1 Address: "192.0.2.60"
** end
NetworkServices status
xStatus NetworkServices
Shows the top level overview of the network services status.
xStatus NetworkServices NTP Address
Returns the address of the NTP server(s) the codec is using.
Value space of the result returned:
<String>
Example:
xStatus NetworkServices NTP Address
*s NetworkServices NTP Address: "12.104.193.12 64.104.222.16 144.254.15.121"
** end
xStatus NetworkServices NTP CurrentAddress
Returns the address of the NTP server that is currently in use.
Value space of the result returned:
<String>
Example:
xStatus NetworkServices NTP CurrentAddress
*s NetworkServices NTP CurrentAddress: "123.254.15.121"
** end
xStatus NetworkServices NTP Status
Returns the status of the endpoints synchronizing with the NTP server.
Unknown: State of the synchronization is unknown.
Synced: The system is in sync with the NTP server
Discarded: The NTP result has been discarded.
Value space of the result returned:
<Unknown/Synced/Discarded>
Example:
xStatus NetworkServices NTP Status
*s NetworkServices NTP Status: Synced
** end
Contents
Introduction
About the API
xConfiguration
Appendices
xCommand
xStatusxStatus

Cisco TelePresence SX80 Specifications

General

Maximum frame rate	60 fps
Supported video modes	720p, 1080p
Video formats supported	H.261, H.262, H.263, H.264, H.265
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Voice codecs	G.711, G.722, G.722.1, G.729ab
Noise reduction	Yes
HDMI ports quantity	5
DVI-D ports quantity	1
USB 2.0 ports quantity	2
Product color	Silver
Rack capacity	1U
Number of persons	0 person(s)
Analog signal format system	NTSC, PAL
Security algorithms	HTTPS, SSH
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols	SIP, H.323, ISDN, TCP/IP, DHCP, QoS
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sensor type	-
Image sensor size	- \

Weight and Dimensions

Depth	309.8 mm
Width	442 mm
Height	44 mm
Weight	3650 g